Posts Tagged architecture
Earthquake Resistant Structures | Engineering Tips
Posted by Architect in Earthquake Engineering on June 15, 2010
Earthquakes are a major geological phenomena. Man has been terrified of this phenomena for ages, as little has been known about the causes of earthquakes, but it leaves behind a trail of destruction. There are hundreds of small earthquakes around the world everyday. Some of them are so minor that humans cannot feel them, but seismographs and other sensitive machines can record them. Earthquakes occur when tectonic plates move and rub against each other. Sometimes, due to this movement, they snap and rebound to their original position. This might cause a large earthquakes as the tectonic plates try to settle down. This is known as the Elastic Rebound Theory.
Haiti Earthquake 2010
Every year, earthquakes take the lives of thousands of people , and destroy property worth billions. The 2010 Haiti Earthquake killed over 1,50,000 people and destroyed entire cities and villages. Designing Earthquake Resistant Structures is indispensable. It is imperative that structures are designed to resist earthquake forces, in order to reduce the loss of life. The science of Earthquake Engineering and Structural Design has improved tremendously, and thus, today, we can design safe structures which can safely withstand earthquakes of reasonable magnitude.
Read the rest of this Article » » »
Building Planning | Earthquake Resistant Buildings
Posted by Architect in Earthquake Engineering on June 15, 2010
The behavior of building during earthquakes depends critically on its overall shape, size and geometry. Hence, at planning stage itself, architects and structural engineers must work together to ensure that the unfavorable features are avoided and a good building configuration is chosen. If both shape and structural system work together to make the structure a marvel.
“If we have a poor configuration to start with, all the engineer can do is to provide a band-aid – improve a basically poor solution as best as he can. Conversely, if we start-off with a good configuration and reasonable framing system, even a poor engineer cannot harm its ultimate performance too much”.
Size of Buildings
Size of Buildings
Design Philosophy of Earthquake Resistant Designs
Posted by Architect in Earthquake Engineering on June 15, 2010
Severity of ground shaking at a given location during an earthquake can be minor, moderate and strong. Thus relatively speaking, minor shaking occurs frequently; moderate shaking occasionally and strong shaking rarely. For instance, on average annually about 800 earthquakes of magnitude 5.0-5.9 occur in the world while about 18 for magnitude range 7.0-7.9. So we should design and construct a building to resist that rare earthquake shaking that may come only once in 500 years or even once in 2000 years, even though the life of the building may be 50 or 100 years?
Design Philosophy of Earthquake Resistant Structures
Engineers do not attempt to make earthquake proof buildings that will not get damaged even during the rare but strong earthquake; such buildings will be too robust and also too expensive. Instead the engineering intention is to make buildings earthquake-resistant; such buildings resist the effects of ground shaking, although they may get damaged severely but would not collapse during the strong earthquake. Thus, safety of people and contents is assured in earthquake-resistant buildings, and thereby a disaster is avoided. This is a major objective of seismic design codes throughout the world.
Read the rest of this Article » » »